Chastity device model CB3000
The material is a highly durable polycarbonate. It is very light weight which adds to the comfort. It is vented with slots allowing natural air drying. The design also allows for hygiene when bathing. Use a soapy sponge or cloth to allow the soap and water to clean the interior of the cage.
The CB-3000 consists of 2 parts:
1. Comes in five sizes: 1 1/2”, 1 5/8”, 1 3/4”, 1 7/8” & 2.0”. These five sizes come with each order. This allows the wearer to experiment to find his exact size. The rings swivel at the bottom making it easy to put on. Each ring consists of two guide pin holes and a recessed locking pin hole. Spacers are provided for an individual fit. These spacers go over the locking pin, between the cuff ring and the cage.
2. Cage Portion (Inside Length 3” – Inside Diameter 1 3/8”)
The cage portion has two guide pins and a locking pin hole. The cuff ring goes behind the ball sack and over the penis. Install the locking pin and the spacers. Put the cage over the penis and then line up the cage portion with the cuff ring. Slide the guide pins and locking pin into place and attach a lock on the tip of the locking pin. Once you have found the exact fit, cut the ends of the guide pins with a pair of side cutter pliers and smooth the edges with an emery board.
Each order comes with the following:
1. One cage.
2. One brass padlock with two keys.
3. Three different lengths of locking pins.
4. Five various sized spacers.
5. Three torture wedges each with different length teeth.
6. White packaging box